|
STOCK NO. ET-4696
(1) USED LANDIS MODEL 3LB 380MM (15”) x 1200MM (47”) CNC
CRANKSHAFT CBN MAIN BEARING GRINDER
S/N: LT-942-16
Year of Manufacture: 2000
Landis 6400 Open Architecture CNC Control System
Maximum Part Length: 1200mm (47”)
Maximum Part Swing: 380mm (15”)
Grinding Wheel Size: 450mm (18”) diameter X 65mm (2.6”)
maximum face
Of grinding wheel.
Grinding wheelhead w/ Landis hydrostatic spindle bearing
assembly.
Linear Motor Drive on Wheelhead Advance & Retraction
(Absolute Optical Linear Scale Feedback)
SBS Automatic Grinding Wheel Balancing System
Integral Grinding Wheel Spindle Drive Motor and parts
for 80 meters/second (16,000 SFPM) of 450mm (18”)
diameter CBN grinding wheel.
Front mounted Diamond Roll Wheel Dressing device.
Accoustic Probe to monitor diamond contact with wheel.
Right Hand Headstock Dead Spindle Type w/ servo driven
lower lateral positioning slide. Servo motor drive to
provide selected RPM or constant work speed. Work speed
range up to 333 RPM.
Left Hand Footstock Dead Spindle Type. Spindle has 50mm
(2”) hydraulic movement.
Marposs E5N In-Process Gage System w/ 2 table mounted
measuring heads.
Visi-Port Spin Window to provide clear viewing area.
Arobotech Table Mounted Centering Type Workrest
Wheel Scrubber System
Grinding Wheel Assembly Lifter
Location: Wixom, Michigan, USA
|
